KEIFU MARU(JPBN), PX46
Observation period : 2018/2/3 to 2018/2/9

This page shows results for the PX46 line based on monitoring by the KEIFU MARU and comparison with the result of assimilation by MOVE-NP.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
124212-0.140.572.22-3.78

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-50300-0.020.310.42-0.62
50-100300-0.190.550.47-2.63
100-150300-0.861.152.22-3.61
150-200300-0.801.001.26-3.78
200-250300-0.140.490.74-1.56
250-300300-0.040.250.53-0.59
300-3503000.050.280.83-0.50
350-4003000.080.210.57-0.49
400-4503000.050.170.48-0.31
450-500300-0.060.240.31-0.75
500-550120-0.110.300.30-0.84
550-600120-0.080.260.37-0.69
600-650120-0.070.250.39-0.68
650-700120-0.000.220.33-0.42
700-7501200.040.190.27-0.28
750-8001200.050.170.28-0.21
800-8501200.070.140.29-0.23
850-9001200.070.120.28-0.20
900-9501200.060.100.26-0.11
950-10001200.030.090.18-0.16


Results of QC

A total of 12 profiles (263 data, reported by BATHY or TESAC) were received from the KEIFU MARU.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 263

  • Position on land test
  • On land: 0 of 12

    Invalid position: 0 of 12

  • Regional range test
  • Error data (low): 0 of 263

    Error data (high): 0 of 263

  • Gradient test
  • Error data: 0 of 263

For details of JMA's quality control procedures, please refer to this page.


Summary of QC

  • QC detected no unnatural profiles.
  • There were differences above 2°C between observation data and the results of assimilation at a depth of between 80 and 200m in the seas south of 15°N.


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX46 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by MOVE-NP ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)