TALLAHASSEE(9V5027, CGU7DKF), PX40
Observation period : 2024/3/24 to 2024/4/4

This page shows results for the PX40 line based on monitoring by the TALLAHASSEE and comparison with the result of assimilation by NPR-4DVAR.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
170546770.050.524.47-2.84

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-5042500.120.441.93-1.69
50-10042500.000.532.17-2.14
100-1504250-0.010.591.80-2.84
150-20042190.090.682.55-2.81
200-25041250.000.562.30-2.25
250-30041250.010.521.53-2.80
300-35041020.050.511.68-2.74
350-40041000.100.471.65-2.07
400-45040970.090.482.16-1.61
450-50040750.080.532.69-2.32
500-55016300.040.522.68-2.33
550-6001620-0.030.482.30-2.20
600-6501612-0.070.492.31-2.32
650-7001610-0.080.452.53-2.27
700-7501610-0.020.433.14-1.53
750-80016100.040.413.67-1.03
800-85016070.100.433.90-0.79
850-90015690.150.454.40-0.55
900-9502160.190.404.47-0.34
950-10000----


Results of QC

A total of 170 profiles (76225 data, reported by BATHY or TESAC) were received from the TALLAHASSEE.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 76225

  • Position on land test
  • On land: 0 of 170

    Invalid position: 0 of 170

  • Regional range test
  • Error data (low): 0 of 76225

    Error data (high): 24 of 76225

  • Gradient test
  • Error data: 33 of 76225

For details of JMA's quality control procedures, please refer to this page.


Summary of QC

  • QC detected some unnatural profiles shown in 'Results of QC'.
  • Some observation data deeper than 600 m were considered to be erroneous.


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX40 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by NPR-4DVAR ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)