CSX SPIRIT(WFLG), PX37
Observation period : 2013/4/27 to 2013/5/2

This page shows results for the PX37 line based on monitoring by the CSX SPIRIT and comparison with the result of assimilation by MOVE-NP.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
99301140.020.544.63-3.11

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-502450-0.000.552.15-2.53
50-1002450-0.040.662.28-3.11
100-15024500.030.903.60-2.89
150-20024440.020.954.63-2.95
200-2502401-0.020.573.73-2.70
250-30023750.020.401.56-1.56
300-35023680.040.341.42-1.04
350-40023150.050.271.20-1.02
400-45022250.040.240.96-1.01
450-5008900.020.210.80-0.99
500-5508800.010.190.52-0.68
550-6008750.030.180.44-0.61
600-6508660.060.160.44-0.63
650-7008600.070.150.49-0.47
700-7508400.060.150.49-0.36
750-8008010.040.150.48-0.30
800-8501740.040.120.39-0.24
850-9000----
900-9500----
950-10000----


Results of QC

A total of 99 profiles (1569 data, reported by BATHY or TESAC) were received from the CSX SPIRIT.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 1569

  • Position on land test
  • On land: 0 of 99

    Invalid position: 0 of 99

  • Regional range test
  • Error data (low): 0 of 1569

    Error data (high): 0 of 1569

  • Gradient test
  • Error data: 0 of 1569

For datails of JMA's quality control procedures, please refer to this page.


Summary of QC

  • No errors were detected with JMA's quality control procedures.
  • There was no significant bias in comparison with the results of assimilation by JMA.


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX37 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by MOVE-NP ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)