CSX SPIRIT(WFLG), PX37
Observation period : 2013/6/22 to 2013/6/27

This page shows results for the PX37 line based on monitoring by the CSX SPIRIT and comparison with the result of assimilation by MOVE-NP.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
9730013-0.030.503.92-3.74

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-502400-0.070.531.77-1.71
50-1002400-0.090.622.45-2.38
100-1502400-0.130.873.14-3.71
150-2002400-0.210.813.92-3.74
200-2502385-0.100.472.71-1.83
250-3002350-0.000.291.35-0.70
300-35023370.010.281.11-0.60
350-4002319-0.010.291.15-0.79
400-4502258-0.000.261.02-0.73
450-5009000.030.270.99-0.69
500-5509000.050.251.11-0.49
550-6009000.070.241.15-0.41
600-6508920.090.221.16-0.42
650-7008780.100.201.10-0.22
700-7508600.090.180.99-0.26
750-8008220.060.160.86-0.33
800-8502120.020.130.28-0.39
850-9000----
900-9500----
950-10000----


Results of QC

A total of 97 profiles (1623 data, reported by BATHY or TESAC) were received from the CSX SPIRIT.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 1623

  • Position on land test
  • On land: 0 of 97

    Invalid position: 0 of 97

  • Regional range test
  • Error data (low): 0 of 1623

    Error data (high): 0 of 1623

  • Gradient test
  • Error data: 0 of 1623

For datails of JMA's quality control procedures, please refer to this page.


Summary of QC

  • No errors were detected with JMA's quality control procedures.
  • There was no significant bias in comparison with the results of assimilation by JMA.


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX37 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by MOVE-NP ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)