MIYAGI-MARU(JCHQ), PX40
Observation period : 2013/11/8 to 2013/11/20

This page shows results for the PX40 line based on monitoring by the MIYAGI-MARU and comparison with the result of assimilation by MOVE-NP.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
98302820.080.614.57-3.23

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-502450-0.031.020.89-3.22
50-10024500.100.864.57-3.23
100-15024500.150.783.33-2.64
150-20024500.080.682.28-2.83
200-2502450-0.020.582.08-2.86
250-30024500.040.551.78-2.13
300-35024500.080.541.31-1.58
350-40024500.110.521.72-1.71
400-45024500.150.471.67-1.69
450-50024500.170.291.54-1.56
500-5509800.140.421.58-1.22
550-6009800.110.371.62-0.90
600-6509800.070.291.58-1.16
650-7009800.060.201.20-1.19
700-7509800.030.160.84-0.48
750-8008820.030.000.79-0.60
800-8500----
850-9000----
900-9500----
950-10000----


Results of QC

A total of 98 profiles (76734 data, reported by BATHY or TESAC) were received from the MIYAGI-MARU.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 76734

  • Position on land test
  • On land: 0 of 98

    Invalid position: 0 of 98

  • Regional range test
  • Error data (low): 0 of 76734

    Error data (high): 0 of 76734

  • Gradient test
  • Error data: 0 of 76734

For datails of JMA's quality control procedures, please refer to this page.


Summary of QC

  • No errors were detected with JMA's quality control procedures.
  • There was no significant bias in comparison with the results of assimilation by JMA.


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX40 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by MOVE-NP ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)