KEIFU MARU(JPBN), PX46
Observation period : 2019/2/11 to 2019/2/16

This page shows results for the PX46 line based on monitoring by the KEIFU MARU and comparison with the result of assimilation by MOVE-NP.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
828080.100.401.56-1.73

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-502000.250.220.58-0.19
50-100200-0.150.470.54-1.60
100-150200-0.180.741.10-1.73
150-2002000.170.671.53-1.37
200-2502000.100.501.56-0.72
250-3002000.270.311.10-0.32
300-3502000.270.260.57-0.38
350-4002000.220.260.64-0.44
400-4502000.110.320.65-0.57
450-500200-0.010.260.33-0.56
500-55080-0.020.250.28-0.46
550-600800.020.210.31-0.35
600-65080-0.010.150.24-0.38
650-700800.040.160.29-0.32
700-750800.080.150.31-0.27
750-800800.120.120.30-0.11
800-850800.150.130.35-0.11
850-900800.170.120.39-0.08
900-950800.170.100.400.01
950-1000800.130.080.330.01


Results of QC

A total of 8 profiles (192 data, reported by BATHY or TESAC) were received from the KEIFU MARU.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 192

  • Position on land test
  • On land: 0 of 8

    Invalid position: 0 of 8

  • Regional range test
  • Error data (low): 0 of 192

    Error data (high): 0 of 192

  • Gradient test
  • Error data: 0 of 192

For details of JMA's quality control procedures, please refer to this page.


Summary of QC

  • QC detected no unnatural profiles.
  • There was no significant bias in comparison with the results of assimilation by JMA.


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX46 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by MOVE-NP ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)