RYOFU MARU III(JGQH), PX46
Observation period : 2019/5/23 to 2019/5/30

This page shows results for the PX46 line based on monitoring by the RYOFU MARU III and comparison with the result of assimilation by MOVE-NP.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
1759670.160.542.70-1.64

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-504250.030.612.03-1.32
50-1004250.060.572.43-1.32
100-1504250.190.762.70-1.48
150-2004250.030.641.76-1.64
200-2504250.060.631.55-1.22
250-3004250.040.581.21-1.29
300-3504250.080.601.25-1.55
350-4004250.200.511.38-1.16
400-4504250.300.521.64-0.86
450-5004250.390.571.76-0.82
500-5501700.360.511.62-0.50
550-6001700.300.421.31-0.37
600-6501700.260.361.22-0.30
650-7001700.240.281.04-0.13
700-7501700.210.230.79-0.07
750-8001700.210.220.79-0.06
800-8501700.190.200.82-0.04
850-9001700.160.160.73-0.06
900-9501700.130.130.59-0.06
950-10001700.100.090.39-0.05


Results of QC

A total of 17 profiles (382 data, reported by BATHY or TESAC) were received from the RYOFU MARU III.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 382

  • Position on land test
  • On land: 0 of 17

    Invalid position: 0 of 17

  • Regional range test
  • Error data (low): 0 of 382

    Error data (high): 0 of 382

  • Gradient test
  • Error data: 0 of 382

For details of JMA's quality control procedures, please refer to this page.


Summary of QC

  • QC detected no unnatural profiles.
  • There were large differences at depths of between 100 and 150 m in the seas around 42°N. The observation data showed sharper thermocline than the assimilation data.


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX46 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by MOVE-NP ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)