KEIFU MARU(JPBN), PX45
Observation period : 2020/1/8 to 2020/1/17

This page shows results for the PX45 line based on monitoring by the KEIFU MARU and comparison with the result of assimilation by MOVE-NP.

Overall statistics

Number of profilesNumber of dataAVERMSDMAXDMIND
2998090.230.662.20-1.53

Abbreviations in the table indicate:
AVE: average difference (observation value minus assimilation value)
RMSD: root mean square of difference
MAXD: maximum difference
MIND: minimum difference



Statistics for each depth range

Depth rangeNumber of dataAVERMSDMAXDMIND
0-50700-0.030.390.94-1.07
50-100700-0.140.491.90-1.29
100-150700-0.190.752.14-1.53
150-2007000.140.682.06-1.26
200-2507000.300.702.07-0.98
250-3007000.350.741.73-1.26
300-3507000.390.721.97-0.90
350-4007000.430.752.08-0.81
400-4507000.440.782.09-0.91
450-5007000.490.782.20-0.77
500-5502800.480.722.16-0.69
550-6002800.440.582.00-0.63
600-6502800.370.471.59-0.54
650-7002800.340.371.29-0.37
700-7502800.250.301.01-0.23
750-8002800.200.250.86-0.15
800-8502800.170.220.75-0.18
850-9002800.140.200.66-0.17
900-9502720.120.170.58-0.13
950-10002700.090.150.46-0.27


Results of QC

A total of 29 profiles (608 data, reported by BATHY or TESAC) were received from the KEIFU MARU.
The results of JMA quality control are as follows.
  • Grounded test
  • Error data: 0 of 608

  • Position on land test
  • On land: 0 of 29

    Invalid position: 0 of 29

  • Regional range test
  • Error data (low): 0 of 608

    Error data (high): 0 of 608

  • Gradient test
  • Error data: 0 of 608

For details of JMA's quality control procedures, please refer to this page.


Summary of QC

  • QC detected no unnatural profiles.
  • There were large differences between observation data and the results of assimilation in areas near the Kuroshio front (around 32°N).


Figures

◊Station map ◊Vertical temperature profile

Vertical profile of temperature along the observing line of PX45 moved the entire profile by 5 degree Celsius.

station map water fall
◊Vertical observation sections ◊Summary of differences (Obs. - Assim.) by depth

Dots and error bars represent the averages and root mean squares of the differences, respectively. Crosses represent the maximum/minimum differences.

observation scatter plot (summary of all station)
◊Vertical sections for the result of assimilation by MOVE-NP ◊Distribution of differences (Obs. - Assim.) by depth
result of assimilation scatter plot(depth bases)
◊Vertical sections of differences (Obs. - Assim.) ◊Distribution of differences (Obs. - Assim.) by temperature
differences (Obs. - Assim.) scatter plot (tempereture basis)